RD12S
12mm With LED ROTARY POTENTIOMETERS
FEATURE
‧Outset molding with resin around the resistor prevents flux build-up.‧Red、green、blue and orange LED colors are available.
APPLICATIONS
‧Ideal for volume, tone and balance control of car audio equipment.
Introduction
COMMON SPECIFICATIONS
| Model | RD12S- Single Color | RD12S- Two Color | RD12S- Three Color |
| Total resistance (KΩ) | 5、10、20、50、100、250 | ||
| Total resistance tolerance | ±20% | ||
Resistance taper | A、B、C、D、E、K、W | ||
| Rated power | 0.05W | ||
| Maximum operating | 50V AC 10V DC | ||
| Total rotational angle | 300±5˚ | ||
| Rotational torque | 10~100gf.cm | 50gf.cm Max | 50gf.cm Max |
| Rotation stopper strength | 3Kgf.cm | ||
| Rotation life | 30,000 cycles | ||
| Switch rating | — | D.C.5V 10mA | D.C.5V 10mA |
| Switch cntact resistance | — | 100 mΩ Max | 100 mΩ Max |
| Switch operating method | — | Push type | Push type |
| Switch contact arrangement | — | Push on | Push on |
| Switch stroke | — | 0.3 (±0.15) mm | 0.3 (±0.15) mm |
| Switch strength | — | 450±200 gf | 450±200 gf |
| Switch life | — | 20,000 cycles | 20,000 cycles |
PRODUCTS NUMBERING SYSTEM
LED SPECIFICATIONS
STANDARD DIMENSION OF SHAFT AND BUSHING
DIMENSIONS
Unit:mm
| Single unit with single LED horizontal type RD12S1FH0  |  | |
| Single unit with single LED vertical type RD12S1FV0  |  | |
| Single unit with two colors LED & push on switch –0.5sw horizontal type RD12S1FH1  |  | |
| Single unit with two colors LED & push on switch – 0.5sw vertical type RD12S1FV1  |  | |
| Single unit with R.G.B LED & push on switch –0.5sw horizontal type RD12S1FH1  |  | |
| Single unit with R.G.B LED & push on switch –0.5sw RD12S1FV1  |  | |